Green Select® Cal-Green

Clean the condenser unit with an all natural environmentally friendly coil cleaner. This non-foaming, not-toxic cleaner is outstanding for removing dirt and grime which hinders heat transfer. By cleaning the fins with Cal-Green you restore the unit’s efficiency while being environmentally responsible. This biodegradable product is free and clear of dyes, fragrances, and masking agents.

Enhanced with naturally derived organic builders, Cal-Green offers buffered alkalinity and detergency boost to provide the highest cleaning action to condenser coils. Cal-Green is manufactured with an award winning innovative technology, which consists of a 100% waste-free eco-friendly process. To ensure that human and animal well-being is held at the upmost importance, Cal-Green has been extensively tested and shown to pose no potential health concerns. Contained in the recyclable container of Cal-Green, is a high performance “green” condenser coil cleaner that is safe for users and the environment. http://www.nucalgon.com/assets/prodlit/3-994B.pdf

Green Select® Evap-Green

Evap-Green’s outstanding cleaning ability will quickly remove the dust, dirt and debris that is typically found on evaporator coils. During the cleaning process, dirt, oils and greases are emulsified and are quickly removed from the coil restoring the unit’s efficiency. Evap-Green is a biodegradable product and does not contain dyes, fragrances, or masking agents. The cleaning agents are derived from naturally organic builders which supplies a controlled and buffered pH and alkalinity during the cleaning process. This product contains is produced by a 100% waste-free and environmentally friendly manufacturing process. Furthermore, this eco-friendly product does not contain any Volatile Organic Compounds, or VOCs, which induce poor indoor air quality. Evap-Green is scientifically proven to be safe for use around humans and animals. Nu-Calgon’s commitment to the environment and product excellence is portrayed through Evap-Green: safe and effective eco-friendly cleaning action in a recyclable container. By using Evap-Green, an all natural cleaner, the coil is being cleaned with the most environmentally friendly product available on the market. http://www.nucalgon.com/assets/prodlit/3-994B.pdf

Solar Powered Rooftop Ventilator

• 10 watt, 17V, thermally protected DC motor
• Provides up to 1,000 CFM
• 13" high effieciency blades
• Dome constructed of heavy-duty galvanized steel in attractive powder coated weathered gray finish
• Expanded steel mesh grill to protect against birds and rodents
• Five-year limited warranty on DC Motor

Solar Powered Gable Ventilator

• Quick and easy installation
• Fully assembled with no electrical wiring
• High impact tempered solar cell castings
• Silicon crystals
• 10 Watts
• Ten-year warranty on panel

Green Select® Evap-Green

The HCV Series of vertical water source heat pumps is designed specifically for boiler-tower applications. Refrigerant circuits use trouble-free cap tube metering devices and proven compressors add reliability. The design is compatible with many older water source heat pump systems with a very compact cabinet, making it ideal for retrofit or tight spaces.

These units are both energy and space efficient. They meet ASHRAE 90.1 efficiencies with EERs reaching as high as 13.0 and COPs ranging from 4.2 to 4.6.

The compact systems require little equipment room space. With few moving parts to wear out, there's a long life expectancy to the units and little maintenance other than routine filter changes are required.

Models are available from 1/2 to 5 tons in a variety of electrical power supplies (all sizes not available in all voltages); right or left hand return can be selected.

Units are exceptionally quiet due to intelligent sound design. Double isolation compressor mounting and torsion-flex mounting system for blower motors deadens vibration for quiet operation.

Download PDF from here

Ductless Mini-Split Systems

R410A Single-Zone Heat Pumps

• Up to 21 SEER
• Wall mounted, inverter system — variable speed compressor
• Inverter control compressor is able to run at the proper revolution, provide the best efficiency and reduce losses
• IAQ plasma electronic air cleaner
• 23% quieter than previous models
• Wireless remote control standard
• Dry mode
• Auto louver/louver up/down
• Quiet mode
• Auto restart/reset
• Low ambient operation for outdoor temperatures down to 14°F
• Optional wired remote control
• Two-year parts, six-year compressor warranty
• Line set and electrical cable not included
• Sold as complete indoor/outdoor system only

Air Conditioning Condensing Units — 18 SEER

Echelon™, 2 to 5 Tons, R410A

Echelon 18 SEER Split System Air Conditioner

The AC8B Series condensing unit is the outdoor part of a versatile system of air conditioning. It is designed to be custom matched with one of our complete line of evaporator sections, each designed to serve a specific function. Matching air handlers are available for upflow, downflow and horizontal left or right applications to provide a complete system. Electric heaters are available if required. Add-on coils are available for use with upflow, downflow or horizontal furnaces. Field installed accessories are available as needed.

Special Benefits

• Superior Coil Protection - A PVC coated steel coil guard completely protects coil from debris and other large damaging material while a polymer mesh further protects the coil against smaller particles.
• Isolated Compressor Compartment - A molded composite bulkhead isolates the compressor from the rest of the unit reducing sound and vibration.
• Protected Compressors - Each compressor is protected against high and low pressure as well as excessive temperature. This is accomplished by the simultaneous operation of high pressure relief valve and temperature sensors which protect the compressor if undesirable conditions occur. A factory installed liquid line filter drier further protects the compressor.
• Environmentally Friendly Refrigerant - Next generation refrigeration R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish - Automotive quality finish provides the ultimate protection from harmful U.V. rays as well as rust creep ensuring long-lasting high quality appearance. A powder-paint topcoat is applied over baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proved in testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower-Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment allowing easy access to control components along with angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier - A factory installed solid core liquid line filter-drier filters harmful debris and moisture from the system.
• Easy Service Access - A full end, full service, access panel with handle makes for easy entry to internal components.
• Long Lasting Operation - Strong and durable composite base pan provides added strength while resisting rust and corrosion as well as reducing sound and vibration.

95% AFUE Multi-Position Gas Furnaces

CP9C Series, Modulating ECM, 33" Height

Up to 98% AFUE Modulating ECM Multi-Position NG33 Gas Furnace

These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.

Special Benefits

• Compact 33” Height and Standard Cabinet Widths
• Multi-Position Design With Minimal Conversion Requirements
• Airflow Leakage Rate of Less Than 1% of Total Airflow @ 1" ESP
• ECM Variable-Speed Motor with Large, Quiet Blower
• Fully-Supported, Slide-Out Blower Assembly for Easy Service Access
• High-Level Self-Diagnostic Controls With Fault Codes
• Sharp Edges Have Been Eliminated By Folding and Flattening the Sheet Metal
• Fully-Gasketed, Independent Access Doors With View Ports and Attractive Retail Appearance
• External Air Filters (Not Included) Provide Flexibility for IAQ Needs
• Patent-Pending Condensate Management System Eliminates the Need for External Condensate Traps

RESCUE EcoTech™ Motors

High Efficiency Direct Drive Blower Motors

Application:

• A high efficiency drop-in for indoor direct-drive blowers originally equipped with a PSC motor
• Designed for air handler, furnace and heat pump systems Features:
• Easy installation — connects just like a PSC motor, no modifications to wiring or system control required
• High Efficiency — up to 82% efficient
• Energy efficiency and low available speed support improved comfort and indoor air quality
• Five speeds: 600–1200 RPM
• Reversible rotation
• Electronically protected motor
• 36" leads
• No capacitor required
• 40°C ambient
• 48 frame; 5-5/8" diameter
• Ball bearing

Varitough Commercial Fan Motors

Inverter Duty, Three-Phase, ODP, 56 Frame

• 70°F maximum ambient rated
• Thermostat overload detection
• Exclusive mounting provisions for AEGIS SGR™ bearing protection ring (sold separately — S59-298 )
• Class F insulation system
• Double-sealed ball bearings
• Shaft-up, open drip proof enclosure
• Continuous duty, air over
• Voltage change device